Table of Contents
Advertisement
Chapter 2 Preparations
2.
Installation and Connection
This section describes procedure to install the server and connect to peripheral devices.
2.1
Installing/Removing the front bezel
When you power on/off the server, handle the optical disk drive, or remove/install a hard disk drive or CPU/IO
module, remove the front bezel.
Removal
1. Insert the provided bezel lock key into the key slot and turn it to the left while pushing lightly.
2. Hold the right edge of the bezel and pull it forward.
3. Slide the bezel right a little to take the hook off the frame and remove the bezel.
Installation
1. Engage the left hook with the server's frame.
2. Push the right side of the frame to mount it.
40
Express5800/R310g-E4, R320g-E4, R320g-M4 User's Guide
2. Installation and Connection
Advertisement
Table of Contents
