Figure 11: Front Panel Controls And Indicators; Table 16. Front Panel Led Functions - Intel SC5275-E Technical Product Specification

Intel® Server Chassis SC5275-E TPS
cable for use with SSI rev 3.0-compliant server boards. The connector cable is compatible with
the 24-pin SSI standard.
When the hot-swap drive bay is installed, a bi-color hard drive LED is located on each drive
carrier (six total) to indicate specific drive failure or activity. For pedestal systems, these LEDs
are visible upon opening the front bezel door.
LED Name
Power/Sleep LED
LAN # 1-Link/Activity
LAN # 2-Link/Activity
Hard drive activity
Status LED
Revision 1.2
A. Power / Sleep LED
B. Power button
C. NMI button
D. Reset Button
E. Sleep Button
F. LAN # 1 Activity LED
G. LAN # 2 Activity LED
H. Hard Drive Activity LED
I. Status LED

Figure 11: Front Panel Controls and Indicators

Table 16. Front Panel LED Functions

Color Condition
Green ON Power on
Amber ON Sleep (S1)
OFF Power off or Sleep (S4)
Green ON Linked
BLINK LAN activity
OFF Disconnected
Green ON Linked
BLINK LAN activity
OFF Disconnected
Green BLINK Hard drive activity
Amber ON Fault
OFF No Activity
Green ON System ready (not supported by all server boards)
BLINK Processor or memory disabled
Amber ON Critical temperature or voltage fault; CPU/Terminator missing
Appendix A: Chassis Spares and Accessories
Description
29