Thermo Scientific Smart2Pure Pro Installation And Operation Manual page 21

DANGER: Lifting of the 30 L or 60 L tank should
be carried out with two person.
DANGER: Do not lift up the 30 L or 60 L tank with
full water capacity. Risk of ergonomic postural
deformities.
Attaching Wall Mounting
Bracket for 30 L Pure Water
Tank
The wall holder for 30 L pure water tanks includes two holder
parts:
• One bottom part wall mounting bracket with
mounting screws
• One upper part wall mounting bracket with mounting
screws.
1. Hold the wall mounting bracket's bottom part at the
desired position on the wall and ensure levelness. Then
mark the four holes for fixing the bracket. Use an
8 mm or 0.31 inch twist drill to make the holes and put in
the four S8 plugs which are supplied with the wall
mounting bracket (refer to Figure 6).
2. Attach the wall mounting bracket bottom part to the wall
by screwing in the four supplied screws with a Philips
screw driver into the wall where you put in the plugs
before (refer to Figure 6).
Figure 6. Mounting bracket to wall
3. Place the 30 L pure water tank onto the mounted wall
mounting bracket bottom part (2 people recommended)
and then screw in the four supplied M8 hexagon nuts
16 | The Installation Area
Mark position for holes
Screws
Wall
Wall Mounting Bracket
Bottom Part
onto the threaded bolts from the wall mounting bracket
bottom part.
Openings for Wall Mounting
Threaded Bolts
Figure 7. Mounting wall bracket to 30 L tank
4. a Unscrew the lid off the 30 L pure water tank.
b. Hold the wall mounting bracket upper part at the
desired position on the wall and mark the two
boreholes for fixing the wall mounting bracket upper
part. Use an 8 mm or 0.31 inch twist drill to make the
holes and put in the two S8 plugs which are supplied
with the wall mounting bracket.
Smart2Pure Pro Ultrapure water system
Hexagon
Nuts
Wall Mounting Bracket
Bottom Part