4.3.5 Inverter Information
This page allows the user to view static data associated with the inverter to
include serial number, installation date, inverter ID (RS-485 address), and
firmware version. Additional parameters are accessed via connected menus
using the up/dn keys. Programmed settings (e.g., Inverter ID, baud rate) are
adjusted using the settings menu. The complete list of inverter information
items can be seen in Figure 4-7, below.
S/N: RN11179CB0
Install: 01/01/2016
INV ID:
1
FW Version
DSP:
1.30
COM:
91.05
SCM:
1.35
Country:
Insulation:
Baud Rate:
AC connection:
Max. Power:
Dry Cont A:
Dry Cont B:
4.3.6 General Settings
This page allows the setting of Language, Date and Time, and RS-485 baud
rate via sub-menus. Use UP/DN arrow keys to navigate to desired sub-menu,
and then press ENT to enter the chosen sub-menu.
or
ENT
RED:
61.06
ARC:
1.05
or
ENT
IEEE1547 480V
100 k
19200bps
or
ENT
3P3W
46000W
Disable
Disable
Figure 4-7: Inverter information screens
Language
►
Date and Time
Baud Rate
Protocol
Figure 4-8: General Settings screen
EPO
►
Grid Settings
Active Pwr Settings
React Pwr Settings
or
ENT
EPO
Grid Settings
►
Active Pwr Settings
React Pwr Settings
EPO
Grid Settings
Active Pwr Settings
►
React Pwr Settings
►
FRT Settings
57
Commissioning
Normal Open
Normal Open
Normal Open