7.3 Adjusting the print position
•
The printing start position can be adjusted accurately within the range of
that the print is not centered.
•
The
•
After printing the pattern for the print position adjustment, you have to find appropriate value.
Position the paper so that the cross on the test print paper comes at the right bottom corner.
⚫
Values can be selected between "-4.0" ~ "+4.0" in increments of 0.1mm.
⚫
To move the print position to the "A" direction, input a value between "-1" and "-4" in the Tabl
e input area
⚫
To move the print position to the "B" direction input a value between "+1" and "+4". In the hea
d input area
button is for adjusting the printing position.
RICOH Ri 1000
User Manual
±4mm. Use this if appears
98