Set The Image With Heat - Ricoh Ri 1000 User Manual

4.5 Set the Image with Heat

User's Notes
• For information about how to use the heat press device, see the manual.
In order to cure the ink so that your images will be color-fast when washing, it is necessary to heat treat
the image so that the image bonds with the garment.
•
If you are using a heat press place the garment on the heat press platen with the printed side
up. Pull by the edges to ensure proper placement and that it is flat on the heat press, minding
not to touch the wet ink. Cover the garment with a sheet of SoftTouch heat press paper, for
Ricoh authorized ink. Close the press and heat the printed garment for 100 seconds at 356ºF or
180ºC. The pressure applied by the heat press when close should be in the light to medium
range. When the time is completed open the heat press and remove the heat press paper
immediately. SoftTouch heat press paper can be reused several times.
•
Instead of SoftTouch, a Teflon sheet or Kraft Paper Cover Sheet can be used. When reusing the
SoftTouch Paper, make sure there are no wrinkles as these will transfer to the garment. If this is
the case use a new sheet. The printed garment is now completed. If you are also printing dark
shirt images you need to reduce the heat press temperature and increase the time. Settings for
dark garments of 330ºF or 165ºC for 90 seconds will also work for light garments.
•
If you are using a textile oven or conveyor dryer, please test the temperature of the printed
image when it exits the dryer to assure that it has reached 330˚F or 165˚C. Also, please do a
wash test of your first attempts to be sure that the inks have cured properly and wash ability
has been attained.
Ricoh Authorized Ink
Light Shirt with Heat Press
Light Shirt with Conveyer Dryer
Heat Curing Temperature and Time Variations for Light Garments
Temperature
356 ˚ F or 180 ˚ C
Printed image must reach
330 ˚ F or 165 ˚ C
RICOH Ri 1000
User Manual
Time
100 seconds
Varies
66