Ricoh Ri 1000 User Manual page 17

3. Insert the waste ink tube in the back of the printer (opposite side of power plug).
Remove waste ink plug and keep in a safe place. Insert the tube by pushing in Ink Tube
into Sleeve
Warning
The printer cannot determine if the waste ink bottle is connected, please make sure the waste ink
bottle is connected properly
During the initial ink charge, if the cover is opened, it will pause the procedure. To resume, hold the
power button down to reboot the printer
4. Connect the power cable to the back of the printer and to a functional wall outlet
[AC Power Connector]
[AC Power Switch]
[Power On/Off]
RICOH Ri 1000
User Manual
17