Ricoh Ri 1000 User Manual page 18

5. Insert ink cartridges
❖ Please note, each cartridge is designed for its corresponding slot. WH1 will go
6. To power on, after flipping the I/O switch to | (on I ), hold down the power button on the front
near the LCD screen, for 3 seconds
.
❖ To power off, hold down the power button on the front near the LCD screen, for more
than 3 seconds and return the I/O switch to O (off)
7. The printer is starting to boot.
8. After booting, the printer will perform initial charging if the printer is not charged.
❖ Initial charging takes about 15-20 minutes and the display will show a status
Warning
During the initial ink charging, don't open front cover or cartridge cover.
9. Once the initial charge is completed, the printer will show READY in the upper left-hand corner
of the LCD screen
in the first slot (closest to the control panel) then WH2 then Black, Cyan,
Magenta, and lastly Yellow towards the back of the printer
percentage (%)
RICOH Ri 1000
User Manual
18