Using Anarip To Print Dark Garments; Pretreating Substrates (Light And Dark) - Ricoh Ri 1000 User Manual

RICOH Ri 1000
User Manual

5 Using AnaRip to Print Dark Garments

Pretreating Substrates (light and dark)

• When swallowing or inhaling ink, cleaning solution or pretreatment liquid, or when getting them in the
eye, follow the guidance in the appropriate safety data sheet (SDS). Download the SDS from the AnaJet
website at http://anajet.com/technical-documentation
• Place ink, cleaning solution, and pretreatment liquid in a cool, well-ventilated place out of the reach of
children.
• Keep waste ink, containers for ink, cleaning solution and pretreatment liquid, and components that have
been in contact with ink out of the reach of children.
• When handling ink, cleaning solution or pretreatment liquid, avoid getting anything on your clothing. If
you do, wash the stained area with cold water.
Pre-treatment Liquid is to be used with care. Do not let it contact your eyes. Do not breathe in the vapor
or mist. Thoroughly wash your hands after handling it. If your clothing gets contaminated, wash it before
reuse. If an accident happens please follow the Caution and First Aid instructions on the Pre-treatment
Liquid bottle label.
Due to the corrosive nature of the pre-treatment solution, we recommend that all users apply pre-
treatment using gloves and a dust mask. Follow the instructions on the label. For dark substrate printing,
the most critical process is proper application of Pre-treatment Solution onto the substrates. Spotty or
improper application of the Pre-treatment or improper drying will result in white ink not bonding
properly with the substrate fabric. This in turn will cause poor image quality and premature wash out of
the image.
For additional information, please refer to the SDS sheets located on the website at
http://anajet.com/technical-documentation
67