CAUTION:
Do not move the carriage to the sliding prohibited range which is outside the designated
sliding range.
Since the wiper of the Maintenance Unit is raised to the Wiper cleaning position,
when the carriage is moved to above the Maintenance Unit, the Wiper interferes with the
Head, it may damage the Head.
Step 9
Wipe away grease that protrudes far beyond the coverage of Fig. 1, 2 and 3.
Also, confirm that grease is not attached to the Filler Sensor.
Step 10
Clean the Encoder Sheet after applying grease to the Guide Rod.
Move the carriage to the left end side by hand.
Feeler Sensor
RICOH Ri 1000
User Manual
123