Ricoh Ri 1000 User Manual page 94

•
Find a pattern with a square in the lightest color and vertical lines on both sides (or closest to this
condition) aligned in row A
•
Note the value indicated over the pattern indicates an appropriate adjustment value.
•
An appropriate adjustment value is "+2". In this example
•
Enter this value in the box for ROW A (up arrows make the value go up, down arrows make the value
go down
•
Repeat this for the other rows in the test pattern (B, C, etc)
•
When there are no straight vertical side lines, like upper illustration, check the last square out of the
sequence of squares with the smallest gap in side lines and find a corresponding value.
•
As upper illustration, the value is "+4".
After you have entered a value for all the rows, press the ALIGN button which sets the new values.
Reprint the pattern and repeat the above process
Repeat the process until all rows (A,B,C etc. ) show the 0 column or close to the 0 column shown as the b
est value
You can always reset to the original settings by entering the factory reset button by going to the settings
tab and select OPTION
RICOH Ri 1000
User Manual
94