Mitsubishi Electric AG-150A Instruction Book page 84

3Charge parameters
Operational
data
4Power consumption data
5Read from USB memory
6Copy to USB memory
Charge parameter data
The format of the CSV file that is output when the charge parameter is saved is as follows:
Note: Dates in the folder name, the file name,and the file contents are displayed in the format selected on the Initial Setting Web.
"March 10, 2010" would be expressed
as [10/03/2010] in the [dd/mm/yyyy] format,
as [03/10/2010] in the [mm/dd/yyyy] format, and
as [2010/03/10] in the [yyyy/mm/dd] format.
[File name]
• Without connection to an expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]A[Indoor unit address (fixed 2 digits)]-[Time zone (1-5)].csv
(yyyy: year, mm: month, dd: date)
Example) ChargeParameter_2010-03-10A01-1.csv
• With connection to an expansion controller
ChargeParameter_[yyyy]-[mm]-[dd]A[Expansion Controller Number(1-3)][Indoor unit address (fixed 2 digits)]-[Time zone
(1-5)].csv(yyyy: year,mm: month,dd: date)
Example) ChargeParameter_2010-03-10A1-01-1.csv
[File contents]
The format of each CSV file is as follows. Each file contains up to 62 days of data.
* Delimiter ("," or ";") and decimal point ("." or ",") that are used by the CSV file are selected on the Initial Setting Web.
1st line
2nd line
3rd line
4th line
5th to 66th line (max.)
* Charge parameter data range is 0 through 999999. If the count value exceeds the maximum value, the count value goes back to 0.
* The file is not output until the operation starts because the data does not exist.
* When the Energy Management License Pack has not been registered, the file is not output.
Touch the button to select, and touch again to deselect.
With the button selected, touch the [Copy to USB Memory] button to copy the charge
parameter data to the \[Serial Number]\[OperationalData]\[ChargeParameters]\[Date] folder
in the root folder of the USB memory in the CSV format.
If the folder does not already exist,one will be created.
Note: The date folder will be created in the format that was specified on the Unit Info
window.
Touch the button to select, and touch again to deselect.
With the button selected, touch the [Copy to USB Memory] button to copy the power
consumption data to the \[Serial Number]\[OperationalData]\[ChargeParameters]\[Date]
folder in the root folder of the USB memory in the CSV format.
If the folder does not already exist,one will be created.
Note: The date folder will be created in the format that was specified on the Unit Info
window.
With the Initial Settings or User Info button selected, touch this button to read the selected
setting data from USB memory.
If there is no data in USB memory, nothing will be read.
* Do not remove the USB drive while the file is being transferred
With the Setting Data, User Info, or Charge Parameter button selected, touch this button to
copy the selected settings to the USB memory.
* A fixed name will be automatically assigned to the file, and the file will be saved.
* Any previous data file for the same equipment in the \[Serial number]\[SettingData] folder
will be overwritten. To save the previous data file, move the file to a different folder before
saving the new file.
* Save the setting while normal communication with the expansion controller is being
established.
* Saving the charge parameter settings may take several dozens of minutes.
Item
File class Charge parameter: 201
Records the range of data read in from non-volatile memory
Data range
Target trend "Address" + M-NET address
Item "Date, SaveValue, Thermo, FanTime, SubHeaterTime"
date, save value, thermo time, fan time, sub heater time
Data * The value for each data type is a cumulative value since the
Format
Start date + "-" + End date
beginning of operation.
– 83 –