Mitsubishi Electric AG-150A Instruction Book page 5

Function
Prohibit local remote control
Filter sign reset
Operation
Error reset
*1
Error history reset
External input
ON/OFF (system)
Operation status of each group
in the system
Filter sign
Monitor
*1
Local operation prohibition
Error
External output
Date and time
License
Unit Info.
Network
Operation
*1
Advanced settings
Groups
Blocks
Interlock
Floor Layout
Error history monitor
Monitor
*1
Refrigerant system
configuration confirmation
External temperature interlock
Operation
*1
Night setback control
Maintenance User
Operation
*1
Building Manager
Connection/Interlock
Information
Error history
Schedule data
Data
Current time
back-up
Saving the data on a USB drive
Reading data from USB
memory
Screen lock function
Device
Touch panel cleaning
maintenance
Time synchronization
Operation of certain functions from the local remote controllers can be prohibited
collectively or for each group or blocks of indoor units.
(Applicable functions: ON/OFF, operation mode, temperature setting, filter sign)
Filter sign can be reset for each group or block of indoor units.
Resets the display of error.
Resets the error history (unit error, communication error).
Connects to an external input/output device that stops the units in an emergency,
run or stop the units, permit or prohibit the operation of units collectively. Requires
an external input/output adapter (sold separately).
The ON/OFF indicator lamp (LED) indicates if one or more groups or all the groups
in the system are stopped.
Operation status (ON/OFF), operation mode, fan speed, temperature setting, air
flow direction, operation status (ON/OFF) of interlocked units, timer enable/disable
status of each group is displayed.
Indicates that the filters on the units in a given group is due for cleaning.
Displays the functions that the controller forbids or the functions that are forbidden
by other controllers.
The address of the unit in error, error code, and the address of the unit that detected
the error will appear.
Outputs signals (run/stop, error) to an external device. Requires an external input/
output adapter (sold separately).
This function is used to set the current date/time and daylight savings time.
This function is used to register license.
This function is used to set unit name, ID number, connection or non-connection of
expansion controller, brightness of the LCD, sound volume, date format, time
format, temperature unit, and display language, test run availability and screen lock
availability.
This function is used to set the IP address, subnet mask address, and gateway
settings for the LAN and also to set the address, K-transmission converter address,
local control prohibit settings, and external input settings for the M-NET; and the
expansion controller settings.
Allows the Master/Sub clock setting to be made.
This function is used to register indoor units, LOSSNAY units, remote controllers, and
lower-level system controllers to a group.
This function is used to register a group to a block.
This function is used to interlock the operation of indoor units and ventilation units.
This function is used to make the basic settings for the floor layout and display position
of the groups.
Up to 384 errors can be stored in memory. (128 errors per AG-150A or expansion
controller (64 unit errors, 64 communication errors))
Allows the user to see which indoor units are connected to each outdoor unit.
Control level of outside temperature interlock function can be set for each group.
Control time and upper/lower limit temperature can be set for setback function.
Allows the maintenance user name and password to be set.
Allows the building manager name, password, function enable/disable settings to be
made.
Group setting information and interlock setting information are retained, even if power
is turned off.
Retained, even if power is turned off.
Schedule information of each group is retained, even if power is turned off.
Current time is retained by the build-in capacitor for a week, even if power is turned off.
The initial setting data, operational data (charge parameter, power consumption) can
be stored to a USB drive.
Initial setting data can be read from USB memory.
The screen can be locked to prevent access until a valid user name and password are
entered.
Touch panel is locked and can be cleaned.
Clocks on the controllers and units that are under the control of the main controller are
synchronized once a day (applicable only to the ones that support this function).
– 4 –
Description