Mitsubishi Electric AG-150A Instruction Book page 63

(4) In the [Monitor] section, select whether to display I/P to or from the general equipment on the monitor screen.
General equipment
display setting
button
(5) Press the [Save setting] on the group setting window to save the settings.
• Registering general equipment in the group for a system with connection to an expansion
controller (PAC-YG50ECA)
From the menu bar on the Setting change window, touch [Initial Settings] > [Groups] to see the group settings window. Select the tab that
corresponds to the EC whose settings are to be made, and make the settings for the air conditioning units, general equipment groups,
and group names.
Note: If the user logs in as a building manager, some of the operations may be prohibited.
Note: Each contact point on the general interface is counted as one unit. Up to 50 units can be connected the controller for each EC
connected.
Note: Air-conditioners and general equipment cannot be in the same group.
Note: Remote controllers or system controllers cannot be connected to general equipment.
Note: Devices that are connected to different expansion controllers cannot be grouped together.
CAUTION
Be sure to make the settings while the expansion controller is connected. (Those settings made without the connection of an
expansion controller will not be reflected.)
Group No.
Group numbers will
be displayed here
Group Name
Input button
Unit selection button
Refer to sections 7-7-1 (P 59), 7-7-2 (P 59), and 7-7-3 (P 61) for the details of how to make the settings for the group names, air
conditioning groups, and general equipment groups.
– 62 –
Remote controller
selection button
System controller
selection button
Save Setting button