Specifications - Mitsubishi Electric AG-150A Instruction Book

13. Specifications

\
Item
Power supply
Temperature
Humidity
Weight
Dimensions (W × H × D)
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
M-NET
Controller drive
Operating
Non operating
30 ~ 90 %RH (No condensation)
2.1kg [4.6 lb]
300 × 185 × 70.3 [25.6] mm 11-
*[ ]: indicate the thickness from the wall.
Specifications
17VDC~32VDC
* Not used when an
expansion controller is
used.
24VDC
0 ~ 40°C [32~104°F]
-20 ~ 60°C [-4~140°F]
/ × 7- / × 2- /
13 5 13
16 16 16
– 91 –
* Power supply: PAC-SC51KUA
[1- / ] in
1
16