Mitsubishi Electric AG-150A Instruction Book page 21

(10) Make the settings for the expansion controller IP
address, M-NET, and external input.
(11) Make the settings for the group names and unit
addresses.
(12) Make the settings for the interlocked LOSSNAY units.
(10) Make the settings for the expansion controller IP
address.
Touch "Save Settings" to confirm that the settings for the M-
NET and external input are the same as the ones made for
the first unit (master).
(11) Make the settings for the general interface and group
name.
A group name different from the first unit (master) may be
assigned.
Check that the address settings are the same as the ones made
for the first unit (master).
Re-enter the same settings for the general interface as the ones
for the first unit (master).
(12) Confirm the settings for the interlocked LOSSNAY
units.
Check that the interlocked LOSSNAY settings are the same
as the ones made for the first unit (master).
– 20 –