20 CLEANING, CARE
260
–
After cleaning, ride the vehicle a short distance until the
engine warms up.
Info
The heat produced causes water at inaccessible loca-
tions in the engine and on the brake system to evapo-
rate.
–
Push back the protection caps of the handlebar controls to
allow any water that has penetrated to evaporate.
–
After the motorcycle has cooled off, lubricate all moving parts
and bearings.
–
Clean the chain. (
p. 134)
–
Treat bare metal parts (except for brake discs and exhaust sys-
tem) with corrosion inhibitor.
Preserving materials for paints, metal and rubber
(
p. 292)
–
Treat the painted parts with a mild paint polish.
Perfect Finish and high gloss polish for paints (
Info
Do not polish plastic parts that are matte when the
vehicle is delivered as this would seriously impair the
material quality.
p. 292)