–
Position the brake calipers.
The brake linings are correctly positioned.
–
Mount screws
yet.
–
Operate the hand brake lever repeatedly until the brake lin-
ings are in contact with the brake disc and there is a pressure
point. Fix the hand brake lever in the activated position.
The brake calipers straighten.
–
S00959-11
Tighten screws
Guideline
Screw, front
brake caliper
–
Remove the locking piece of the hand brake lever.
–
Position wheel speed sensor
–
Mount and tighten screw
Guideline
Screw, front wheel
speed sensor
–
Take the motorcycle off the front lifting gear. (
–
Remove the rear of the motorcycle from the lifting gear.
(
p. 126)
V00006-11
5
on both brake calipers but do not tighten
5
on both brake calipers.
M10
45 Nm (33.2 lbf ft)
6
in the drill hole.
7
.
M6
10 Nm (7.4 lbf ft)
WHEELS, TIRES 15
Loctite
®
243™
p. 128)
191