KTM 1090 Adventure R Owner's Manual page 268

22 TROUBLESHOOTING
Faults
Engine turns only if the clutch
lever is drawn
Engine turns although a gear is
engaged
Engine turns but does not start
Engine dies during the trip
Malfunction indicator lamp
lights up
The ABS indicator lamp lights
up
266
Possible cause
The vehicle is in gear
Safety start system is faulty
Safety start system is faulty
The plug-in connection of the
fuel hose connection is not
connected
Fault in fuel injection system
Fuel quality is insufficient
Lack of fuel
Fault in fuel injection system
Fault in fuel injection system
ABS fuse is blown
Wheel speeds of front and rear
wheels differ greatly
Malfunction in ABS
Action
–
Shift the transmission to idle
–
Read out the fault memory using the
KTM diagnostics tool.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Connect the plug-in connection of the
fuel line.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Add suitable fuel.
–
Refuel. ( p. 109)
–
Read out the fault memory using the
KTM diagnostics tool.
–
Read out the fault memory using the
KTM diagnostics tool.
–
Change the fuses in the fuse box.
( p. 220)
–
Stop, switch off the ignition, start
again.
–
Read out the fault memory using the
KTM diagnostics tool.
.