Product Description - Sirona TiBase Operating Instructions Manual

2 Product description Sirona Dental Systems GmbH
Operating Instructions TiBase
2

Product description

TiBase and Abutment Screw are products which are used for the digital
acquisition of an implant position and for the restorative supply of
implants.
Instead of a deformation post to transmit the implant position to a model,
a Scanbody is required in the digital process, which can be optically
acquired in an effective way along with the mouth situation. For this
purpose, a titanium base (product name: TiBase) is mounted on an
implant or laboratory analog with an Abutment Screw (product name for
separate product: Abutment Screw) and depending on the acquisition
system a suitable Scanbody is connected to this.
The titanium base is designed on the bottom side in line with the implant's
specific requirements and can only be screwed onto specific implants
with a certain diameter. The top side is formed for the acquisition of a
Scanbody.
A titanium base can also be used for the restorative supply of an implant.
For this purpose, a mesostructure is glued onto the titanium base, which
can be individually adjusted in line with aesthetic and functional
requirements. Depending on the mesostructure design, the product glued
to the titanium base can be used as the abutment or directly bolted crown.
An Abutment Screw is also used for the definitive attachment to the
implant.
The TiBase product comprises two individual components: Titanium base
and Abutment Screw.
The Abutment Screw product comprises two identical Abutment Screws.
Abutment Screws are provided separately, as they are either required as
a replacement part or as an additional attachment to the laboratory
analog.
62 87 630 D3568
4 D3568.201.01.13.02 03.2017