Transmitting Data (Rs 232 Interface); Options For Data Transmission - wtw inoLab pH/ION 735 Operating Manual

Operation
68
4.7

Transmitting data (RS 232 interface)

4.7.1 Options for data transmission

Via the RS 232 interface, you can transmit data to a PC or an external
printer. The following table shows which data are transmitted to the in-
terface in which way:
Data
Current
measured values
of the connected
sensor
Stored measured
values
Calibration
records
Note
The following rule applies: With the exception of the menus, shortly
pressing the p key generally outputs the display contents to the inter-
face (displayed measured values, measuring datasets, calibration
records).
Control Operation / description
! By pressing p shortly.
Manual
! Simultaneously with every
! By pressing p for a long
Automatic, at
intervals
! Simultaneously with every
! Displayed dataset with p
Manual
! All datasets according to
For details, see section 4.6.3.
! Calibration record of a sen-
Manual
! All calibration records after
For details, see section 4.6.5.
! For the respective sensor
Automatic
inoLab pH/ION 735
manual storage process
(see section 4.6.1).
time. Then you can set the
transmission interval.
automatic storage process
(see section 4.6.2).
after calling up from the
storage.
the filter criteria via the Out-
put to RS232 function.
sor with p (after calling up
from the storage or at the
end of a calibration).
calling up from the storage
via the Output to RS232
function.
at the end of a calibration.