Storage - Care of Sweden CuroCell S.A.M. PRO User Manual

4.2 Reconditioning
PUMP
See section 4.1 for instructions.
MATTRESS
1. Disconnect the tubes from the pump and deflate the mattress. Also open the CPR valve.
2. Remove the cover. For more information on cleaning covers, see section 4.1. If the product
is equipped with a foam core it should be removed and cleaned separately.
3. Move the mattress to a clean area that is suitable for cleaning.
4. Wipe off the cells, all tubes and the CPR valve with a mild cleaning solution for this purpose
such as: alcohol with or without tensides, Isopropanol 70 %, oxidating solutions or chlorine
max 1 %.
5. Wipe off and disinfect all the work surfaces with an alcohol based cleaning agent intended
for this purpose.
6. Put the mattress together. If the tubes have for any reason come loose from the cells, these
must be reattached according to the illustration in section 2.3. Close the CPR valve.
FOAM CORE (CuroCell S.A.M.® PRO CF16)
Clean the affected area with a mild cleaning solution for this purpose such as: alcohol
with or without tensides, Isopropanol 70%, oxidating solutions or chlorine max 1 %.
Gently squeeze out any water. NB: Do not wring or roll the cushion to extract water. Let the
cushion dry in a warm, ventilated area (not in direct sunlight). The cushion must be completely
dry before it is used again.
NOTE:
Check the hygiene cover each time the product is cleaned. If damaged, it must be
replaced or repaired. Also check the pump, tube connectors and power cord during
cleaning. Damaged parts must be replaced or repaired.

5. Storage

It is advisable to store the mattress and pump in the product bag (accessory). Place the pump
so that it is protected by the mattress. Handle the stored product with care. Do not place any
heavy objects on top of it. The pump should be stored in a dry environment indoors and out of
direct sunlight.
11