Table of Contents
Advertisement
Operating instructions
Dimming curves
To access the units dimmer curves, press the "MENU" button to show "DIMCURVE" on the LCD display.
Press the "ENTER" button and use the "UP" and "DOWN" buttons to set the dimming curve required.
"Linear" - LELinear dimming curve
"S-Curve" - LED S-Curve dimming curve
"I-Square" - LED Inverse Square dimming curve
"Square" - LED Square dimming curve
Press the "ENTER" button to confirm the setting.
To choose between Halogen and LED dimmer curves, press the "MENU" button to show "DIMMODE" on
the LCD display. Press the "ENTER" button and use the "UP" and "DOWN" buttons to set the dimming
curve mode required.
"LED" - LED dimming curves
"HALOGEN" - Halogen dimming curves
To exit out of any of the above options, press the "MENU" button.
Manual mode:
To access manual mode, press the "MENU" button on to show "MANUAL" on the LCD display. The unit
is now in manual mode. Press the "ENTER" button and use the "UP" and "DOWN" buttons to set the
dimmer from "000" - "255". Press the "ENTER" button and use the "UP" and "DOWN" buttons to set the
strobe from "000" - "255".
(000 = LED off, 255 = LED at full brightness).
(000 = Strobe off, 255 = Strobe fast).
To exit out of any of the above options, press the "MENU" button.
Backlight:
To access the backlight setting, press the "MENU" button on the rear of the unit to show "BACKLIG" on
the LCD display. Press the "ENTER" button and use the "UP" and "DOWN" buttons to select between
"OFF" or "ON". Press the "ENTER" button to confirm the setting.
To exit out of any of the above options, press the "MENU" button.
Software version:
To access the fixtures software version, press the "MENU" button and use the "UP" and "DOWN" buttons
to show "Soft.Ver" on the LCD display. The unit will now display the fixtures software version.
To exit out of any of the above options, press the "MENU" button.
Fixture temperature:
To access the fixtures temperature, press the "MENU" button and use the "UP" and "DOWN" buttons to
show "TEMP" on the LCD display. The unit will now display the fixtures temperature.
To exit out of any of the above options, press the "MENU" button.
www.prolight.co.uk
MP 120 LED Fresnel WW User Manual
7
Advertisement
Table of Contents
