Troubleshooting - Fisher & Paykel DH8060P Installation And User Instruction Manual

The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
contact your Fisher & Paykel trained and supported service technician.
PROBLEM
Pressing 'POWER'
does not turn
on the dryer
Dryer does
not heat
Touching
does not start
the drying cycle
Dryer keeps
stopping
and starting
Dryer stops
working
mid-cycle
26

TROUBLESHOOTING

POSSIBLE CAUSES
Fault with household
power supply.
Dryer set to 'Air Dry' cycle.
Full water tank.
The dryer has progressed
to 'Cool'.
Dryer door not closed properly.
Is the dryer displaying a user
warning or fault code?
Water tank full or not properly
in place.
Lint filter needs to be emptied.
Dryer is overloaded.
'Delay Start' function is set.
Keylock is ON.
The 'Wrinkle Free' option
has been selected.
Power failure.
Dryer has been paused.
Dryer door is open.
Items fell off the rack
when using 'Rack Dry' cycles.
WHAT TO DO
Try plugging in and turning on another
electrical device.
Check what cycle the dryer is set to
(refer 'Drying cycles'). Change to
preferred cycle.
Refer to 'Emptying the water collection tank'.
Check the progress lights– are
'Cool' or 'End' lights illuminated?
Refer to 'Dry progress'.
Open and close the door. Check that the
lint filter is correctly in place and not
obstructing the door.
Refer to 'User warnings' and 'Fault codes'.
Refer to 'Emptying the water collection
tank'. Ensure the water tank is properly
in place.
Empty the lint filter and ensure it is
correctly in place.
Remove some items from the dryer.
Refer to 'Delay Start' for more information.
To disable touch and hold
for two seconds.
Refer to 'Wrinkle Free' for more
information.
Press 'POWER' and restart the
desired cycle.
Touch the button to restart the cycle.
Ensure the door is firmly shut.
Ensure the rack is installed correctly
(refer to 'Sorting and loading',
'Drying rack') and replace garments
that may have fallen from it.
button