Table of Contents
Advertisement
The following is a list of problems you may encounter when using this appliance and
some suggestions that may help to correct the problem. If you still have problems,
contact your Fisher & Paykel trained and supported service technician.
PROBLEM
Pressing 'POWER'
does not turn on
the dryer
Dryer does
not heat
Touching
does not start
the drying cycle
Dryer keeps
stopping
and starting
Dryer stops
working
mid-cycle
28
TROUBLESHOOTING
POSSIBLE CAUSES
Fault with household
power supply.
Dryer set to 'Cool Air' cycle.
Full water tank.
The dryer has progressed
to 'Cool'.
Dryer door not closed properly.
Is the dryer displaying a user
prompt or fault code?
Water tank full or not properly
in place.
Lint filter needs to be emptied.
Dryer is overloaded.
'Delay Start' function is set.
Keylock is ON.
The 'Wrinkle Free' option
has been selected.
Power failure.
Dryer has been paused.
Dryer door is open.
Water tank full or not properly
in place.
Items fell off the rack
when using 'Rack Dry' or
'Wool' cycles.
Environmental conditions may
be affecting dryer operation.
WHAT TO DO
Try plugging in and turning on another
electrical device.
Check what cycle the dryer is set to
(refer 'Drying cycles'). Change to
preferred cycle.
Refer to 'Emptying the water collection tank'.
Check the progress — are 'Cool' or 'End'
shown on the display? Refer to 'Dry progress'.
Open and reclose the door. Check that
the lint filter is correctly in place and not
obstructing the door.
Refer to 'User Prompts' and 'Fault codes'.
Refer to 'Emptying the water collection tank'.
Ensure the water tank is properly in place.
Empty the lint filter and ensure it is
correctly in place.
Remove some items from the dryer.
Refer to 'Delay Start' for more information.
To disable touch and hold
for three seconds.
Refer to 'Wrinkle Free' for more
information.
Press 'POWER' and restart the desired cycle.
Touch the
button to restart the cycle.
Ensure the door is firmly shut.
Refer to 'Emptying the water collection tank'.
Ensure the water tank is properly in place.
Ensure the rack is installed correctly
(refer to 'Sorting and loading',
'Drying rack') and replace garments
that may have fallen from it.
In particularly cold conditions, the
room temperature may be too cold for
the dryer to run efficiently.
button
Advertisement
Table of Contents
