Service Key - CAB A2+ User Configuration Manual

3 Offline Menü
1
3.3

Service Key

A service key is required for accessing special service functions not accessible to the operator. This key switches the
printer to service mode and enables:
Access to additional configuration parameters
•
• Adjustment of the label sensor
• Resetting of the service counter
• Additional information in the status print and in the device list
• Printout of an event list
• Changing of the device name
Saving and loading of configuration settings
•
Access to PIN-protected configuration parameters and functions without entering the PIN
•
Access to configuration parameters for optional assemblies, even if they are not currently installed
•
!
Attention!
Incorrect settings and data loss via unauthorized access.
Access protection is deactivated when the service key is inserted. Operation of the printer by unauthorized
persons can lead to incorrect settings and data loss in this case.
Provide the service key to authorized persons only.

Remove service key after service work and store it in a secure location.

Fig. 4

Insert service key into a USB master interface on the back of the printer.
The service key also can be inserted while the device is switched on.
Notice!
i
In this document, parameters and functions which are only accessible when the service key is inserted are
indicated using the following note:
Access only when service key is inserted!
Inserting the service key
1