9
Memory Media
9.6
Memory Media Functions in the Offline Menu
Accessing the Memory card menu is only possible if a memory medium is installed in the default card slot.
Only the medium in the default slot ( "4.1.4" on page 18) can be operated via the operating panel. When operating
via an interface, each card slot can be addressed via a path.
9.6.1
Label from Card
Labels whose descriptions are saved on the memory medium can be printed using the Label from card function.
1.
Select the Label from card function in the Memory card menu.
Press the button.
2.
The name of the label found at the top of the index of the memory medium is displayed.
Select the desired label in the index of the medium with the ~ and buttons.
3.
Press the button.
4.
If a label is selected which was saved with a fixed label quantity, the print job is started immediately.
For label descriptions with a variable label quantity, a request to enter the label quantity
If additional input on the label description is required, the display requests to enter the variable data
5.
Enter the label quantity/variable data with the following buttons:
|
cursor left
}
cursor right
~
increase value at cursor position by 1 or select next letter in alphabet
decrease value at cursor position by 1 or select previous letter in alphabet
Press the button briefly to confirm the input and start the print job.
6.
Canceling input:
Press and hold the button at least 2 seconds.
9.6.2
Print Directory
You can print out the index of the installed memory card with the Print directory function.
1.
Insert printable medium (labels, endless paper) which extends across the entire printing width.
2.
If the printout is to occur using thermal transfer printing, insert transfer ribbon with the maximum width.
Press the menu button.
3.
4.
Select the Print directory function in the Memory card menu.
Start printout with the button.
5.
The printout contains:
•
the name of the memory medium
information on the saved files
•
•
the size of the available memory area
49
is displayed.
.