Displaying The Memory Tag; Split Memory - Yaesu FTM-100DR Operating Manual

Using the Memory

Displaying the memory tag

The frequency and name tag display format can be selected for each channel.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [3 MEMORY], then press
.
The menu list appears.
3
Rotate the DIAL to select [1 ALPHA TAG SIZE], then
press .
The setting options appear.
4
Rotate the DIAL to select the desired display size.
"1 LARGE": Displays the memory tag in large letters.
"2 SMALL": Displays the memory tag in small letters.
Tip The default setting: 2 SMALL
5
Press and hold
The display size is set, and the display returns to the previous operating screen.
Tip You can also switch the display by pressing and holding
of following the procedure above.
LARGE

Split memory

A separate transmit frequency may be registered to a memory channel to which a
receive frequency has already been registered.
For details, refer to the Advanced Manual (download from the Yaesu website).
48
for over one second.
for over one second.
for over one second instead
SMALL