Recalling The Home Channel - Yaesu FTM-100DR Operating Manual

2
Rotate the DIAL to select the desired memory channel.
Press again to return to VFO mode.
Tip
Unused memory channels are skipped.

Recalling the home channel

1
Press [P2] on the microphone.
The home channel appears on the screen.
Tip Change the frequency by rotating the DIAL to return to
VFO mode.
Press [P2] again to return to VFO mode and display the frequency that was selected
before the home channel was recalled.
Tip
When shipped from the factory, the home channel of 144 MHz band is set to 144.000 MHz while the
home channel of 430 MHz band is set to 430.000 MHz.
Using the Memory
MIC
ABC DEF
1 2 3 A
GHI JKL MNO
4 5 6 B
PQRS TUV WXYZ
7 8 9
C
0 D
DTMF MICROPHONE
MH-48
43