Yaesu FTM-100DR Operating Manual page 71

1. Changes or modifications to this device not expressly approved by YAESU MUSEN could void the
user's authorization to operate this device.
2. This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference including received, interference that may cause undesired operation.
3. The scanning receiver in this equipment is incapable of tuning, or readily being altered, by the User
to operate within the frequency bands allocated to the Domestic public Cellular Telecommunications
Service in Part 22.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject
to the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio
exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit
pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The Scanner receiver is not a digital scanner and is incapable of being converted or modified to a
digital scanner receiver by any user.
WARNING: MODIFICATION OF THIS DEVICE TO RECEIVE CELLULAR RADIOTELEPHONE
SERVICE SIGNALS IS PROHIBITED UNDER FCC RULES AND FEDERAL LAW.
We, Yaesu Musen Co. Ltd of Tokyo, Japan, hereby declare that this radio equipment FTM-100DE is in full
compliance with EU Radio Equipment Directive 2014/53/EU. The full text of the Declaration of Conformity
for this product is available to view at http://www.yaesu.com/jp/red
This transceiver works on frequencies that are
regulated and not permitted to be used without
authorisation in the EU countries shown in this table.
Users of this equipment should check with their
local spectrum management authority for licensing
conditions applicable for this equipment.
Products with the symbol (crossed-out wheeled bin) cannot be disposed as
household waste.
Electronic and Electrical Equipment should be recycled at a facility capable of
handling these items and their waste by-products.
Please contact a local equipment supplier representative or service center for
information about the waste collection system in your country.
DECLARATION BY MANUFACTURER
EU Declaration of Conformity
ATTENTION – Conditions of usage
Disposal of Electronic and Electrical Equipment
AT BE BG CY
DK ES EE
GR HR HU
LU LV MT NL
RO SK SI SE
LI NO –
CZ DE
FI FR UK
IE IT LT
PL PT
CH IS
– – –