Yaesu FTM-100DR Operating Manual page 38

Digital Group ID (DG-ID) function
Tips
• The transmit and receive DG-ID default number is set to "00".
• Normally, for general operation set the DG-ID number to "00" for both transmit and receive.
8
Press the
function ON, then you can check whether or not
other Group Member stations are operating within
communications range.
The other stations also need to turn the GM function ON.
While operating in the GM function, the call sign, the
distance and the direction of a maximum 24 stations
with the GM function turned ON, and that are within
the communication range, may be checked.
Rotate the DIAL knob to select the other stations.
9
Press the
function OFF.
Tips
• Note that when the receive DG-ID number of your transceiver is set to a DG-ID number other than
"00", received signals that do not have the same DG-ID number may not be heard.
• The distance and direction information is displayed only when the position information is included in
the signal of the other station.
• The transceivers that may transmit position information with the GM function.
38
key to turn the GM (Group Monitor)
key to turn the GM (Group Monitor)