Name And Function Of Each Component; Front Panel; Front - Yaesu FTM-100DR Operating Manual

Name and function of each component

Front panel

Front

①
②
➀ Power/LOCK key (
Pressing the key for over 2 seconds switches the power between ON and OFF.
Briefly pressing the key while the transceiver is turned ON engages or releases the
key lock.
➁ VOL knob
Turning the knob clockwise increases the volume, whereas turning it
counterclockwise decreases the volume.
➂ Mode/Status indicator
Indicates the transmission/reception status with a two-color combination on the
upper and lower portions of the mode/status indicator.
Communication status
Receiving analog audio
Transmitting analog audio
Receiving digital audio
Transmitting digital audio
Receiving digital data
Transmitting digital data
Receiving signals with unmatched
tone frequency or DCS code
➃ Dot matrix LCD display
BAND MHz key (
➄
Switches each band between the operating band and sub-band.
Pressing and holding for over one second allows you to set the frequency in 1 MHz
units.
➅ DIAL knob
• Allows you to set the operating band frequency.
Turning clockwise increases the frequency whereas turning counterclockwise
decreases the frequency.
10
③ ④
⑦ ⑧ ⑨ ⑩
)
Upper portion Lower portion
)
⑪ ⑫ ⑬ ⑭
Green Green
Red Red
Green Blue
Red Blue
Green White
Red White
Green Blink in blue
⑤
⑥