Basic Setting - Mitsubishi Electric FX5-ENET User Manual

7.3

Basic Setting

Set the IP address and functions of FX5-ENET.
Own Node Setting
Set the IP address of the FX5-ENET.
Item
IP Address IP Address
Setting
Subnet Mask
Default Gateway
Opening Method
Description
Sets the IP address of the FX5-ENET.
Set the class and subnet address of the FX5-ENET to the same settings as
those of the external devices that communicate with the FX5-ENET.
Contact the network administrator before setting the IP address.
Sets the subnet mask of the FX5-ENET.
When setting the IP address of the default gateway and performing
communication with an external device in another network through a router,
set the subnet mask pattern of the default gateway. All the devices in the
same subnetwork should have a
common subnet mask. The subnet mask setting is not required for
communication in a single network.
Sets the default gateway of the FX5-ENET.
Set the IP address of the relay device (default gateway) to access the
external device in another network.
Set a value that satisfies the following conditions as the IP address of the
default gateway.
• The class of the IP address is A, B, or C.
• The subnet address of the default gateway is the same as that of the
FX5-ENET.
• The host address part is not a sequence of "0" or "1".
Select how to open a connection.
• Do Not Open by Program: Select this item to perform open processing
and open the connection by the external device. Program for open/close
processing is not required.
• Open by Program: Select this item to perform open/close processing and
open/close the connection by a program.
*1
7 PARAMETER SETTINGS
Setting range
• Blank
• 0.0.0.1 to 223.255.255.254
(Default: Blank)
• Blank
• 0.0.0.1 to 255.255.255.255
(Default: Blank)
• Blank
• 0.0.0.1 to 223.255.255.254
(Default: Blank)
• Do Not Open by Program
• Open by Program
(Default: Do Not Open by
Program)
31
7.3 Basic Setting
7