Mitsubishi Electric FX5-ENET User Manual page 75

Default gateway IP address
■Default gateway IP address (Un\G76 to Un\G77)
Stores default gateway IP address on the own station set with GX Works3. (Page 31 Basic Setting) The stored values
can be changed by the IP address change function.
Address Description
Un\G76 3rd octet, 4th octet
Un\G77 1st octet, 2nd octet
Ex.
When default gateway IP address is 192.168.3.255: Un\G76 = K003255, Un\G77 = K192168
If the default gateway IP address is changed by the IP address change function, priority will be given to the
default gateway IP address stored by the IP address change function. To enable the set value in GX Works3,
clear the IP address storage area.
Ethernet address (MAC address)
■Ethernet address (MAC address) (Un\G102 to Un\G104)
Stores Ethernet address (MAC address) on the own station.
Address Description
Un\G102 Serial ID
Un\G103 Lower one digit of vendor ID, model ID
Un\G104 Upper two digits of vendor ID
Ex.
When MAC address is 00-26-92-60-10-25: Un\G102 = H1025, Un\G103 = H9260, Un\G104 = H0026
Error code
■Error code (Un\G108 to Un\G139)
Stores error code (connection number 1 to 32) of general-purpose Ethernet. (0 is stored when communications are normal.)
For details on error code, refer to Page 57 Module error.
Address Description
Un\G108 Stores error code of connection number 1.
Un\G109 Stores error code of connection number 2.

Un\G139 Stores error code of connection number 32.
Open completion signal
■Open completion signal (Un\G152 to Un\G153)
Open completion signal for each connection number.
Address bit Connection number
Un\G152 b0 Connection number 1
b1 Connection number 2

b15 Connection number 16
Un\G153 b0 to b15 Connection number 17 to 32
Description
• On: Open completed
• Off: Closed or not open
APPX
Appendix 4 Buffer Memory
A
73