Mitsubishi Electric FX5-ENET User Manual page 77

MAC address of the already connected station
■MAC address of the already connected station (Un\G202 to Un\G204)
Stores the MAC address of the station, which was connected to the network earlier, in the station with duplicated IP address.
Address Description
Un\G202 Serial ID
Un\G203 Lower one digit of vendor ID, model ID
Un\G204 Upper two digits of vendor ID
Ex.
When MAC address is 00-26-92-60-10-25: Un\G202 = H1025, Un\G203 = H9260, Un\G204 = H0026
"FFFFFFFFFFFFH" is stored in the station that has been already connected to the network.
MAC address of the station connected later
■MAC address of the station connected later (Un\G205 to Un\G207)
Stores the MAC address of the station with duplicated IP address in the station which was connected earlier to the network.
Address Description
Un\G205 Serial ID
Un\G206 Lower one digit of vendor ID, model ID
Un\G207 Upper two digits of vendor ID
Ex.
When MAC address is 00-26-92-60-10-25: Un\G205 = H1025, Un\G206 = H9260, Un\G207 = H0026
"FFFFFFFFFFFFH" is stored in the station with duplicated IP address.
Remote input (RX)
■Remote input (RX) (Un\G1000 to Un\G1127)
Stores the input data (bit unit) sent from the slave station to the master station (FX5-ENET) with cyclic transmission.
Address bit Remote input
Un\G1000 b0 RX0
b1 RX1

b15 RXF

Un\G1127 b0 to b15 RX7F0 to RX7FF
Remote output (RY)
■Remote output (RY) (Un\G1256 to Un\G1383)
Set the output data (bit unit) to be sent from the master station (FX5-ENET) to the slave station with cyclic transmission.
Address bit Remote output
Un\G1256 b0 RY0
b1 RY1

b15 RYF

Un\G1383 b0 to b15 RY7F0 to RY7FF
Description
• On: Remote input is turned on.
• Off: Remote input is turned off.
Description
• On: Remote output is turned on.
• Off: Remote output is turned off.
APPX
Appendix 4 Buffer Memory
A
75