Mitsubishi Electric FX5-ENET User Manual page 82

CCIEF Basic each status
■CCIEF Basic each status (Un\G4160)
Each status of CC-Link IE Field Network Basic is stored.
Address bit
Un\G4160 b0
b1
b2
Diagnostic information display request
■Diagnostic information display request (Un\G4162)
Reads the diagnostic information of the slave station that is specified by the 'Diagnostic request information' (Un\G4127) is
read to Un\G4128 to Un\G4159 after execution of the END instruction of the scan where bit 0 turns OFF and ON.
0 is stored if the setting of the diagnostic information is completed during the END process.
Address bit
Un\G4162 b0
Diagnostic information display request execution status
■Diagnostic information display request execution status (Un\G4163)
Stores the execution status of the diagnostic information display following the 'Diagnostic information display request'
(Un\G4162).
• 0: Diagnostic information display not requested
• 1: Diagnostic information display requested
• 2: Diagnostic information display completed
APPX
80
Appendix 4 Buffer Memory
Name
Cyclic transmission status
Data link status
Reserved station specification status
Name
Diagnostic information display request
Description
This register turns ON when initial process is completed. Turns OFF when the
cyclic transmission is stopped because of an error, etc.
• Off: Not performed
• On: Being performed
This register turns ON when the 'Data link status of each station' (Un\G4104 to
Un\G4105) is ON for even one station.
• Off: All stations normal
• On: One or more faulty stations
This register turns ON when the 'Reserved station specification status' (Un\G4113
to Un\G4114) is ON for even one station.
• Off: Not designated
• On: Designated
Description
• Off: Diagnostic information display not requested
• On: Diagnostic information display request