Download  Print this page

Electrolux EDS Installation Manual page 36

Efficient dosing system
Hide thumbs

Advertisement

36
Power wiring
Incoming power wiring from the Wiring Harness Plate Assembly connects to the Pump Interface Printed Circuit Board
power terminal block (Found on Item 1, Replacement Parts List).
• 115 V
The live wire goes to terminal 1. The neutral wire goes to terminal 4. Black jumper between terminal 1 and terminal
2. White jumper between terminal 3 and terminal 4.
• 208/230 V
White jumper from terminal 2 to terminal 3
Motor voltage rating of installed motors must match power wiring configuration.
Installation manual

Advertisement

Table of Contents
loading

  Related Manuals for Electrolux EDS