Electrolux EDS Installation Manual page 30

30
A password is needed to continue.
The default password is set to 01234.
When the password is set you will enter the INSTALLER MENU.
Activate the INITIAL SYSTEM SETUP menu.
INSTALLER MENU
INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM FORMULAS
DATA TRANSFER
SET UNITS OF MEASURE
Activate the SET PUMP MAPS menu.
SYSTEM SETUP
EDIT INST PASSWORD
EDIT MGR PASSWORD
SET PUMP MAPS
EDIT ACCOUNT NAME
EDIT MACHINE NAME
Select operation mode and press enter.
OPERATION MODE
STANDARD MAPPING
EURO MAPPING
Standard mapping
In standard mapping there are 5 available washer signals/programs. Each signal is capable of running upp to 3
pumps and each pump is capable of dispensing up to 3 different amounts; A, B and C. Each pump can be allocated
to more than one washer signal.
The first time a pump receives a signal it will dispense the "A-amount". The second time a pump receives a signal it
will dispense the "B-amount". The third and subsequent time it will dispense the "C-amount".
PUMP MAPS
WASHER SIGNAL 1
WASHER SIGNAL 2
WASHER SIGNAL 3
WASHER SIGNAL 4
WASHER SIGNAL 5
Installation manual