Electrolux EDS Installation Manual page 26

26
Insert the USB stick with the downloaded wash programs in the EDS controller.
Activate the READ SETUP menu.
DATA TRANSFER
WRITE REPORTS
READ SETUP
WRITE SETUP
UPDATE FIRMWARE
WRITE ACTIVITY LOG
Activate the setup file from the list. Before uploading there will be a warning message on the display. Press Enter to
upload the selected setup file.
SETUP FILE
XXXXX
XXXXX
XXXXX
XXXXX
XXXXX
Download wash programs from the EDS controller to a USB stick
Enter the MAIN MENU and activate the INSTALLER MENU.
MAIN MENU
EMERGENCY PUMP STOP
USER PRIME PUMPS
USER MANUAL FLUSH
MANAGER REPORTS
INSTALLER MENU
VIEW EFFICIENCY
A password is needed to continue.
The default password is set to 01234.
When the password is set you will enter the INSTALLER MENU.
Activate the DATA TRANSFER menu.
INSTALLER MENU
INSTALLER SERVICE
INITIAL SYSTEM SETUP
PROGRAM ID CATEGORY
DATA TRANSFER
SET UNITS OF MEASURE
Insert the USB stick in the EDS controller.
Activate the WRITE SETUP menu.
DATA TRANSFER
WRITE REPORTS
READ SETUP
WRITE SETUP
UPDATE FIRMWARE
WRITE ACTIVITY LOG
Installation manual