Download  Print this page

Electrolux EDS Installation Manual page 13

Efficient dosing system
Hide thumbs

Advertisement

Installation manual
13
fig.W01134A
Demount the top panel.
fig.W01143
Connect the cable from the J2 port on the EDS controller to the RS232 port on the I/O module.
The connection is in the bottom of the I/O module. It might be necessary to temporarily demount the I/O module to be
able to connect.
Strap the cable at suitable positions. The cable must not be in contact with the drum.

Advertisement

Table of Contents
loading

  Related Manuals for Electrolux EDS