Download  Print this page

Electrolux EDS Installation Manual page 15

Efficient dosing system
Hide thumbs

Advertisement

Demount the cover.
Connect the cable from the J2 port on the EDS controller to the RS232 port on the CPU module.
Strap the cable at suitable positions. The cable must not be in contact with the drum.
Note!
If there is no free RS232 port on any of the I/O modules it is necessary to install a new I/O module into the ma-
chine. Follow the instructions for this in the Service manual for the specific model.
Installation manual
15
fig.W01143
fig.W01147

Advertisement

Table of Contents
loading

  Related Manuals for Electrolux EDS