Table of Contents
Advertisement
Network
Item
Sub-items and Settings
AP Mode
Channel
Auto(5GHz) / Auto / CH1 /
Settings
CH2 / CH3 / CH4 / CH5 / CH6
Access point mode
/ CH7 / CH8 / CH9 / CH10 /
connection settings
CH11
Camera SSID & Password
Regenerate Password
Execute / Cancel
IP Address
Subnet Mask
ST Mode
Camera Remote Control
Enable / Disable
Settings
Station mode
Connected Network
connection settings
Scan Networks
Manual Register
SSID
Security
Password
DHCP
IP Address
Subnet Mask
Gateway
DNS Auto
Primary DNS Server
Secondary DNS Server
None / WEP / WPA
On / Off
On / Off
Description
Sets the wireless LAN channel.
Auto(5GHz) is available on the PXW-Z280V only.
Displays the SSID and password of the camcorder.
Creates a new password.
Execute: Execute function.
Displays the IP address of the camcorder in access point
mode.
Displays the subnet mask of the camcorder in access point
mode.
Sets whether to enable remote control from a device
connected to the camcorder by wireless LAN in station mode.
Displays the connected wireless LAN network (access point).
Detects wireless LAN networks (access points) and displays a
list.
Select a destination from the list to connect.
Registers settings for manual connection to an access point.
Enter the SSID for the destination to connect.
Set the type of security for the destination to connect. Select
WPA if the type of security of the destination access point is
WPA or WPA2.
Enter the password for the access point to connect.
Turns DHCP on/off.
Enter the IP address of the camcorder when DHCP is set to
Off.
Enter the subnet mask of the camcorder when DHCP is set to
Off.
Enter the default gateway of the camcorder when DHCP is set
to Off.
Turns auto DNS acquisition on/off.
Enter the primary DNS server when DNS Auto is set to Off.
Enter the secondary DNS server when DNS Auto is set to Off.
114
Advertisement
Table of Contents
