Sony PXW-Z280T Operating Instructions Manual page 17

Setting Status
display display
Station Mode Non Active
Searching
Disconnected
<SSID>
Wired LAN settings
Setting Status
display display
Off ---
On Disconnected
Connected
Modem settings
Setting Status
display display
Off ---
On Disconnected
Connected
Connecting
No Modem
Description
Not operating in
station mode.
Displayed when
Wi-Fi chip fails.
Attempting to
connect to the
previously
connected network
(access point).
Not connected to a
network (access
point).
Also displayed
when IP address
was not assigned
using DHCP.
Connected to
<SSID> network
(access point).
Description
Wired LAN setting
is off.
Disconnected from
network.
Also displayed
when IP address
was not assigned
using DHCP.
Connected to a
network.
Description
Modem setting is
off.
Not connected to a
network.
Connected to a
network.
Attempting to
connect to a
network.
Modem dongle is
not inserted.
17
NCM/Streaming Status screen
Displays the connection status and streaming
status in network client mode.
Network Client Mode Network client mode status
Status
CCM Name Name of connected CCM in
network client mode
CCM Address Address of connected CCM
in network client mode
Streaming Status Streaming status
Streaming Format Streaming format
information
Streaming Type Type of currently selected
streaming setting
Streaming Destination Streaming destination
Address address
Streaming Audio Audio channel to
Channel superimpose on streaming
output
Network Client Mode Status settings
Status display Description
Off Network client mode is off.
Connected Network client mode is on,
CCM/XDCAM air is
connected, and control from
CCM/XDCAM air is
enabled.
Connecting Attempting to connect to
CCM/XDCAM air.
If the status does not change
from "Connecting," the CCM
address setting may be
incorrect. Check that the
address is set correctly.
Destination Address The host name or IP address
Error of the CCM to connect may
be incorrect.
Authentication Failed The user name or password
used to connect to the CCM
may be incorrect.
No Network Access Cannot connect to a network.
Check the network
connection status and
settings.
Certificate is not yet The CCM certificate is not
Valid valid.
The network date and time
settings may be incorrect.
Note