External Devices; Wireless Lan Connection; Internet Connection - Sony PXW-Z280T Operating Instructions Manual

Solid-state memory camcorder
Table of Contents

Advertisement

External devices

Symptom
The computer does not
recognize the camcorder.
Clips cannot be loaded on
the computer.

Wireless LAN connection

Note
• Obstructions and electromagnetic interference between the camcorder and wireless LAN access point or terminal
device, or the ambient environment (such as wall materials) could shorten the communication range or prevent
connections altogether. If you experience these problems, check the connection/communication status after moving the
camcorder to a new location, or bringing the camcorder and access point/terminal device closer together.
Symptom
A terminal device cannot
access the camcorder.
You cannot log in to the
camcorder.
The web remote control
does not appear.

Internet connection

Symptom
File uploading fails.
File uploading is not
available.
Solution
Disconnect the USB cable from the computer, then connect it again securely.
Disconnect the USB cable from your computer, reboot your computer, and follow the
steps again in the correct order.
Disconnect the USB cable from the computer, restart the camcorder, and then connect it
again.
Application software must be installed to load clips on your computer (page 82).
Solution
• Check the wireless LAN connection (IP address, etc.).
• The communication setting between the access point and client may be invalid. For
details, refer to the operating instructions of the access point.
Check the user name and password that you set.
Check the IP address setting.
Solution
The user name and password of the server may not be correct.
Input the correct user name and password.
3G/4G/LTE signal conditions may be poor.
Move to another location and try again.
138

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pxw-z280v

Table of Contents