Sony PXW-Z280T Operating Instructions Manual page 83

Renaming a folder on an external HDD/
USB media
1
Select USB >Rename Folder (page 110)
in the Media menu.
2
Select the folder to rename from the
folder list, and press the SET button or
SEL/SET dial.
A file name input screen appears.
3
Enter a folder name, and select Done.
The folder is renamed.
Checking for copy read errors
You can check for read errors after writing clips
by setting USB >Error Check (page 110) in the
Media menu to On.
Formatting (initializing) an external
HDD/USB media
1
Select USB >Format USB (page 110) in
the Media menu.
2
Select Execute using the V/v/B/b button
or SEL/SET dial, and press the SET
button or SEL/SET dial.
Initialization (formatting) begins.
3
When the formatting is completed, a
message appears. Select OK.
Checking the remaining capacity on an
external HDD/USB media
The free space on an external HDD/USB media is
displayed in the Media Remain row on the screen
displayed when USB in the Media menu is
selected.
About power supply to an external HDD/
USB media
Power is supplied to an external HDD/USB
media from the USB 3.0 (HOST) connector
automatically when performing an operation in
the USB menu item in the Media menu.
However, power supply is not started under the
following conditions, even when performing an
operation in the USB menu item in the Media
menu. To start the supply of power, perform the
solution shown in the table.
State
During clip recording,
playback, thumbnail display,
proxy recording, formatting/
restoring media,
management file update,
software update, camcorder
resetting, network reset,
computer connecting,
confirmation screen display,
streaming
Insufficient supply voltage
Rec Format >File System is
not set to exFAT
Network Client Mode is On Set Network Client
Notes
• Clips on an external HDD/USB media cannot be
copied to recording media inserted in an SxS memory
card slot.
• Clips cannot be recorded while power is supplied to the
USB 3.0 (HOST) connector. To start recording clips,
terminate the USB menu item operation in the Media
menu.
83
Solution
Terminate the previous
operation.
Change the battery or
replace the input power
supply.
Set to exFAT.
Mode to Off.