Table of Contents
Advertisement
Network
Item
Sub-items and Settings
Wired LAN
Setting
On / Off
Wired LAN
connection settings
Camera Remote Control
Enable / Disable
Detail Settings
DHCP
On / Off
IP Address
Subnet Mask
Gateway
DNS Auto
On / Off
Primary DNS Server
Secondary DNS Server
Modem
Setting
On / Off
Modem settings
Device Name
IP Address
Subnet Mask
Network Client
Setting
On / Off
Mode
Network client
NCM Settings Select
mode settings
NCM Settings1
Display Name
CCM Address
CCM Port (1 to 65535 (8443)) Sets the port number of the destination CCM or XDCAM air
User Name
Password
CCM Certificate
Load / Clear / None
CCM Certificate Status
Loaded / Default
Reset
Execute / Cancel
NCM Settings2
NCM Settings3
Description
Turns the wired LAN function on/off.
Sets whether to enable remote control from a device
connected to the camcorder by wired LAN.
Configures properties of the wired LAN connection.
Turns DHCP on/off.
Enter the IP address of the camcorder when DHCP is set to
Off.
Enter the subnet mask of the camcorder when DHCP is set to
Off.
Enter the default gateway of the camcorder when DHCP is set
to Off.
Turns auto DNS acquisition on/off.
Enter the primary DNS server when DNS Auto is set to Off.
Enter the secondary DNS server when DNS Auto is set to Off.
Turns the modem connection on/off.
Displays the device name of the modem.
Displays the IP address of the modem.
Displays the subnet mask of the modem.
Starts (On) or stops (Off) network client mode.
Selects preset settings (NCM Settings1/NCM Settings2/NCM
Settings3) comprising network client mode connection
settings configured beforehand.
Sets the display name shown in the NCM Settings menu.
Sets the address of the destination CCM or XDCAM air to
connect. Host name or IP address
to connect.
Sets the user name for authentication of the CCM connection.
Sets the authentication password of the CCM connection.
Loads a certificate when connecting to CCM or XDCAM air,
and clears settings.
Displays the certificate loading status when connecting to
CCM or XDCAM air.
Resets the settings of NCM Settings to the defaults.
Execute: Execute function.
Same as NCM Settings1.
Same as NCM Settings1.
115
Advertisement
Table of Contents
