Table of Contents
Advertisement
Camera
Item
Sub-items and Settings
Auto Exposure
Auto Shutter
On / Off
Brightness
automatic
A.SHT Limit
exposure settings
1/100 / 1/150 / 1/200 /
1/250 / 1/2000
A.SHT Point
F5.6 / F8 / F11 / F16
Clip High light
On / Off
Detect Window
1 / 2 / 3 / 4 / 5 / 6 / Custom
Detect Window Indication
On / Off
Average Peak Level Ratio
–99 to +99 (±0)
Custom Width
40 to 999 (500)
Custom Height
70 to 999 (500)
Custom H Position
–479 to +479 (±0)
Custom V Position
–464 to +464 (±0)
Color Bars
Setting
On / Off
Color bar settings
Type
ARIB / 100% / 75% / SMPTE
Flicker Reduce
Mode
Auto / On / Off
Flicker correction
settings
Frequency
50Hz / 60Hz
(NTSC area: 60.00, PAL area:
50.00)
Flash Band
Setting
On / Off
Reduce
Flashband
correction settings
Handle Zoom
Setting
Off / Low / High / Variable
Handle zoom
speed settings
High
1 to 8 (8)
Low
1 to 8 (3)
Auto Black
Auto Black Balance
Execute / Cancel
Balance
Auto black balance
settings
Description
Turns the auto shutter control function on/off.
Sets the fastest shutter speed of the auto shutter function.
Sets the F-stop value of the iris where auto shutter operation
starts.
Turns the function that ignores brightest areas to provide a
flatter response at high luminance on/off.
Sets the light meter range for automatically adjusting the
exposure according to the brightness of the subject. (Not
available when adjusting exposure manually)
Turns the Detect Window function on/off.
Sets the ratio between the average value and the peak of the
video signal used for Auto Exposure detection.
Sets the width of the Detect Window.
Sets the height of the Detect Window.
Sets the horizontal position of the Detect Window.
Sets the vertical position of the Detect Window.
Turns the color bars on/off.
Selects the type of color bars.
Sets the flicker correction mode.
Sets the frequency of the power source supplying the lighting
that is causing the flicker.
Turns the flashband reduction function on/off. It reduces
blown out highlights at either the top or the bottom of the
image when shooting with a flash for a still camera.
Sets the speed of the handle zoom.
(Enabled when the handle zoom switch is set to FIX.)
Sets the zoom speed of the handle zoom lever when High
handle zoom speed is selected.
Sets the zoom speed of the handle zoom lever when Low
handle zoom speed is selected.
Executes the auto black balance function.
Notes
• Cannot be set during recording or color bar display.
• Cannot be set when in Interval Rec mode, frame recording
mode, or slow shutter mode.
93
Advertisement
Table of Contents
