Siemens SINUMERIK 840D sl Operating Manual page 20

Configuring with EPLAN Add-In
5.2 Settings
Procedure
Proceed as follows:
1. Click the "Define unknown devices" button.
The dialog with the same name opens.
Figure 5-6 "Define unknown devices" dialog: Creating device definitions
2. Enter the "Order number" of the device.
3. Select whether it is a motor or sensor in the drop-down list at "DRIVE-CLiQ type".
20
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA