4. Select the file "Siemens.EplAddIn.DQTopo.dll" from the directory into which you unpacked
the EPLAN Add-In.
Figure 3-2
EPLAN dialog "API modules (assemblies)"
5. Confirm with "OK".
Once you have successfully loaded the EPLAN Add-In, the "Siemens DQ-Topo" main menu
is displayed.
Figure 3-3
Loading the EPLAN Add-In using the command line
You will find information on how start the EPLAN Add-In using a command line in the Section
"Command line interface" (Page 36).
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA
New "Siemens DQ-Topo" main menu
Method of delivery and loading the EPLAN Add-in
3.2 Loading the EPLAN Add-In
13