Siemens SINUMERIK 840D sl Operating Manual page 4

Preface
Target group
This publication is intended for machine operators using EPLAN.
There is also basic information for administrators who, for example, install EPLAN Add-In.
Benefits
A SINAMICS topology configured in EPLAN can be used in Create MyConfig Topo.
The SINAMICS topology is exported to EPLAN electric P8 as a file via the "Siemens DQ-Topo"
Add-In. This output file is imported for further use in Create MyConfig Topo. The data already
configured for the production of a machine can therefore continue to be used with immediate
effect in CMC.
Purpose of the document
This document describes the use of the EPLAN Add-In "Siemens DQ-Topo".
Standard scope
This documentation only describes the functionality of the standard scope. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or when
servicing.
Furthermore, for the sake of clarity, this documentation does not contain all detailed information
about all product types and cannot cover every conceivable case of installation, operation or
maintenance.
Technical Support
Country-specific telephone numbers for technical support are provided in the Internet at the
following address (https://support.industry.siemens.com/sc/ww/en/sc/2090) in the "Contact"
area.
4
SINUMERIK Integrate Create MyConfig - EPLAN Electric P8 Add-In
Operating Manual, 12/2017, A5E43099659B-AA